RF Technical Blog of World Family of Radio Maria

 

 

 

 

 

Here I would simply clarify the difference of setup we talked about between this two measurements with the following two drawings . The two 10 dB attenuator are used to guarantee a perfect matching in the section after the cables . Of course they limit the dynamic range of the measurements . For this reasons they are not always used or used with lower values .

I ended now to test the possibility  to measure the Return Loss of a coaxial filter with some simple tools , like an RTL Key , a Noise Generator and a SWR Bridge , a software and a laptop . I have used the following setup :  And two different software :  A) HDSDR ( that we already have used in three video for pointing satellites , measuring the satellite Beacons and check and measure in the FM band ) :  https://www.hdsdr.de/ B) SATSAGEN from Alberto Ferraris :  https://www.albfer.com/satsagen-download-page/ The results are in the following pictures :  HDSDR : Much faster , but easy to saturate , limited span and limited markers possibilities SATSAGEN  : Much slower , but difficult to saturate , no limited in higher span , big facilities on markers  At the end , at these frequencies and for these amplitude ranges , with SOME PATIENCE AND SKILLS, the results are quite "similar" to that of a professional HP instrument as follow :  Of course...

How to tune a Coaxial Filter     In Fig.1 is shown the connection between Spectrum Analyzer-Rhotector (VSWR Bridge ) and a Coaxial Filter:                                                             Fig. 1. Connections between the instruments.   With this kind of connection you can measure the Return Loss or the Standing Wave Ratio of the coaxial filter at port F (shown in Fig. 1), Table 1 reports the relationship between the R.L and the VSWR. Table 1. Return Loss and SWR.     The Coaxial Filter is tuned by rotating the four knobs named Lin, Lacc1, Lacc2 and Lout, as in Fig 2. Delta Meccanica provides a graduation and a table for  the first position where is better to start the tuning. Fig. 2. Tuning Kobs. Delta Meccanica provides a graduation and a table for  the first position...

  THE REASON OF AN IMPORTANT STRATEGICAL CHOICE   While I am fond for the excellence of the measuring systems , after long   thinking,   I have recently decided to push on the use of some and cheap tools as an alternative way to make our daily work . What changed my idea was mainly some things : - Covid limitation to bring big strange tools , like intruments on airplanes - Starting to give some intermediate tools to people that doesn’t have any professional instruments - Advantage that they can start practically to play with something   that we teach on our training at a very low cost Nevertheless , I have to stress that this is only an intermediate step to professional instruments that luckily in this year cost one tens of the same instruments of let’s say 10 years ago and have same or better performances . There are NO MIRACLES   : performances are always related to costs . But at the end I have decided to put together small boxes that ,...